If you’re like me, then you’re tired of worrying about the same boring things day-in and day-out. Sure, ridiculous fuel prices and worldwide poverty are fine for Barry Pleberson and the Lowbrow Bunch, but not me! Like many of you, I live in a basement, rarely see the light of day, and eat only a potent mash of No-Doz, Vicodin, and Smarties, for which I expect to receive FDA approval any day now.
No, tramps like us, baby we were born to run… from zombies.
That’s right, the zombie apocalypse is just around the corner, what do you intend to do about it? For all you know, the zombie apocalypse just may be my next project, and THEN where will you be? Standing athwart the helm of the USS Totally Fucked as it circles the drain, that’s where.
Unless.
Unless you take appropriate preparatory measures.
We’ve all seen what happens to those who are caught by surprise by the zombie apocalypse. Guns are useless, trucks and explosives are effective but unwieldy. What you need is the ZOM-B-GONE, and I’m just the man to show you how to make one.
 |
 |
First, I used a hacksaw to cut a notch roughly the size of an axe head into an aluminum Tee-ball bat, available at many convenient garage sales and thrift stores. Next, I stripped off all the paint using a wire wheel, but you needn’t. If, for instance, you find the zombies are already prying off your hastily applied window boards, you may feel free to skip this step. |
 |
To make the axe part, I welded a pair of steel flat washers to the top and bottom of the old axe head I sized the previous notches to fit. These are for threading a long bolt through to shore up the inevitably shoddy welds that will result from trying to fuse steel to aluminum. | |
 |
 |
The spike started life as some sort of valve wrench I got at a junk yard. You could probably use something similarly shaped, as long as it is roughly the same metal as your axe head. Otherwise the weld won’t hold very well and everyone will refer to you as the zombie who used to be a guy that tried to fuse dissimilar parent metals. Yes, people are cruel sometimes. I chopped the round bit off, and sharpened the pointy bit with angle and bench grinders. |
 |
 |
To make the hand guard, I took a giant busted U-bolt, chopped off the ends, welded a spoon to the bottom, and a metal pipe clip to the top. |
 |
 |
|
Run a bolt though the whole shebang, starting with the spoon at the base of the handle, and ending with the washers on the head of the axe. I attached the top of the hand guard to the bat with 4 steel pop-rivets, and the spike to the top with an eye-bolt over the central bolt. Then, I welded pretty much everything. The places where I was welding steel to aluminum served more or less to make the joints a tight fit, but I’m of the opinion that more welding is better than less welding, so I went ahead and welded the shit out of it. |
|
 |
| Anyway, after all that cooled off and the pleasant red mist of “welding lust” faded from my vision, I put a couple coats of pretty Rustoleum on it and wrapped a tennis racket grip around the handle. Again, if this is a rush job for you, please feel free to skip these finishing touches. |
SO wicked. Make some more of these, dude.
Thanks!! I will!
If you’d actually like to buy one, I’ll be happy to sell you the prototype. I admit the price is a bit on the prohibitive side at the moment, so it may behoove you to wait until I build version 2.0. I have lots of design improvements I intend to implement.
-kaz